Poly(O-aminobenzyl alcohol) films with and without organic compound on aisi 316 surface; synthesis and the corrosion performances


Creative Commons License

ÖZYILMAZ A. T., Ozgen B., Celik C.

Journal of the Turkish Chemical Society, Section A: Chemistry, cilt.7, sa.2, ss.375-382, 2020 (Scopus) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 7 Sayı: 2
  • Basım Tarihi: 2020
  • Doi Numarası: 10.18596/jotcsa.641851
  • Dergi Adı: Journal of the Turkish Chemical Society, Section A: Chemistry
  • Derginin Tarandığı İndeksler: Scopus, TR DİZİN (ULAKBİM)
  • Sayfa Sayıları: ss.375-382
  • Anahtar Kelimeler: AISI316, Corrosion, Electropolymerization, O-aminobenzyl alcohol
  • Hatay Mustafa Kemal Üniversitesi Adresli: Evet

Özet

In this work, we obtained the anticorrosive properties of polymer films (SS/PABA and SS/PABA-ORG) synthesized on stainless steel surface by adding an organic substance to aniline derived o-aminobenzyl alcohol monomer synthesis medium. Firstly, we prepared the polymer coating bath by dissolving 0.15 M o-aminobenzyl alcohol monomer in the electrolyte solvent containing acetonitrile and 0.15 M LiClO4. From this bath, poly (o-aminobenzyl alcohol) (PABA) film was synthesized in 30 segments by cyclic voltammetry (CV) technique at a scanning rate of 50 mV/s at a potential range of-0.20/1.80 V on the AISI 316 (SS) working electrode in contrast to the platinum electrode. For the synthesis of organic structure doped polymer film (PABA-ORG), we repeated the same synthesis process by dissolving C21H27NO2(k) (ORG) at low concentration in the same bath. We investigated the corrosion performances of bare SS, SS/PABA, and SS/PABA-ORG substrates, using open circuit potential – time, anodic polarization, and AC impedance techniques in the solution of corrosion study. As a result, we observed that the organic additive added to the synthesis medium caused changes in the synthesis behavior of PABA. Corrosion performance tests showed that PABA and PABA-ORG films increased the corrosion protection performance of the SS electrode, and we observed a reduction of the corrosion rate of the SS electrode.